In the Material Assignment dialog window select a Material type from the drop down menu. Then select the material that you want to apply from the Material list and click on components in the graphical window or the side browser and click "Apply".
Select a fill material of any Board type, select components that you want assign the material to and click "Apply".
Use the dropdown menu to select a laminated board type and a fill material. Click on a components made from this type of material and click "Apply".
Some materials (e. g. Laminated Boards) have a pre-applied final covering layer. Meanwhile, some materials (e.g. Chipboards) need to be separately covered by veneer. Use a Veneer type cover material to assign veneers or protective compensation films to the surfaces of your model.
3. How to apply edge banding taking into account the banding thickness and position?
sunk banding, outer banding
Select the grain direction for the Fill material (Fill Grain) or for Cover material (Cover Grain).
7. How to make a mass replacement of one material by another?
identification of the assigned material, selection of the parts with the same material
Make Group selection by used Material to change it for all selected parts. Open the Material Assignment window and use picker to click on the surface of the model that you want to make current. Use funnel to automatically select all parts with the above-mentioned current material (description of the current material is shown on the top of the window). Select a new material that should be applied to selected parts and click "Apply".